SEK 0,00
(fraktkostnad: 0,00)
MakerBot - Röd - 0.9 kg - PLA-fiber (3D) - för Replicator 2X, Fifth Generation, Z18
Art.nr.: [1274268] | Tillverkare: Makerbot | Modell-nr.: MP05779 | EAN: 0817913011074
Varan finns inte i lager
Varan finns inte i lager. Mer info
Frakt 49,00 - Instabox - Välj själv närmaste paketbox
Se alla alternativ
| Instabox - Välj själv paketbox | 49,00 |
| Bring - Närmaste utlämningställe | 49,00 |
| Budbee - Hemleverans - Levereras på eftermiddagen eller kvällen. | 69,00 |
| Bring - Hemleverans - Levereras till din dörr på vardagar mellan 08:00 och 16:00. | 135,00 |
Slutsåld
Varan finns inte i lager.
SEK
800,00
ex. moms 640,00
Totalt inkl. frakt
849,00
Meddela mig när varan åter finns i lager
Funktionen kräver att man är inloggad. Skapa en användare och gör bruk av vårt smarta listsystem till att hålla koll på framtidiga köp, regelbundna köp eller önskelistor.
Skapa användare
Login
Skapa användare
Login
Send på mail
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you’re new to 3D printing, MakerBot PLA Filament is a good material to start with because it’s easy to use and performs well on most prints.
MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.
Be sure your build plate is level, clean and oil-free before printing.
If you’re new to 3D printing, MakerBot PLA Filament is a good material to start with because it’s easy to use and performs well on most prints.
MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.
Be sure your build plate is level, clean and oil-free before printing.