SEK 0,00
(fraktkostnad: 0,00)
Telegärtner J00020A0501, RJ-45, 6a, 70 mm, 37 mm, 70 mm
Art.nr.: [1984384] | Tillverkare: Telegärtner | Modell-nr.: J00020A0501 | EAN: 4018359362973
Fjärrlager (15-22 arbetsdagar)
Varan finns i vårt fjärrlager, leveranstiden är 15-22 arbetsdagar. Mer info
Fri frakt Instabox - Närmaste Paketbox
Se alla alternativ
| Instabox - Välj själv paketbox | Gratis |
| Bring - Närmaste utlämningställe | Gratis |
| Budbee - Hemleverans - Levereras på eftermiddagen eller kvällen. | 129,00 |
| Bring - Hemleverans - Levereras till din dörr på vardagar mellan 08:00 och 16:00. | 135,00 |
SEK
1.610,00
ex. moms 1.288,00
Totalt inkl. frakt
1.610,00
Funktionen kräver att man är inloggad. Skapa en användare och gör bruk av vårt smarta listsystem till att hålla koll på framtidiga köp, regelbundna köp eller önskelistor.
Skapa användare
Login
Skapa användare
Login
Send på mail
- Transmission performance: Cat.6A acc. to ISO/IEC 11801; EN 50173-1
- fully shielded
- 360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
- can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity
- either horizontal or vertical installation in the cable duct as a result of variable cable inlet
- Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box
- option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm
- can be combined with covers of a wide variety of switching programs
- simple lead presorting guarantees a good transmission performance without damaging the leads
- cover plate can be retrofitted with a flip-up loss-proof, transparent label field
- protection flaps
- detachable vertical fixing rail of the four-hole bearer ring (e.g. for subfloor installation)
- Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the outlets without additional installation kits
- fully shielded
- 360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
- can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity
- either horizontal or vertical installation in the cable duct as a result of variable cable inlet
- Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box
- option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm
- can be combined with covers of a wide variety of switching programs
- simple lead presorting guarantees a good transmission performance without damaging the leads
- cover plate can be retrofitted with a flip-up loss-proof, transparent label field
- protection flaps
- detachable vertical fixing rail of the four-hole bearer ring (e.g. for subfloor installation)
- Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the outlets without additional installation kits