SEK 0,00
(fraktkostnad: 0,00)
Gembird - Röd - 1 kg - röd - färglåda - PETG-fiber (3D)
Art.nr.: [21455452] | Tillverkare: Gembird | Modell-nr.: 3DP-PETG1.75HY-01-R | EAN: 8716309131711
Varan finns inte i lager
Varan finns inte i lager. Mer info
Frakt 49,00 - Instabox - Välj själv närmaste paketbox
Se alla alternativ
| Instabox - Välj själv paketbox | 49,00 |
| Bring - Närmaste utlämningställe | 49,00 |
| Budbee - Hemleverans - Levereras på eftermiddagen eller kvällen. | 69,00 |
| Bring - Hemleverans - Levereras till din dörr på vardagar mellan 08:00 och 16:00. | 135,00 |
Slutsåld
Varan finns inte i lager.
SEK
209,00
ex. moms 167,20
Totalt inkl. frakt
258,00
Meddela mig när varan åter finns i lager
Funktionen kräver att man är inloggad. Skapa en användare och gör bruk av vårt smarta listsystem till att hålla koll på framtidiga köp, regelbundna köp eller önskelistor.
Skapa användare
Login
Skapa användare
Login
Send på mail
Kenmerken:
High speed filament for fast printers like Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron printers
Fits perfectly in Bambu Labs Automatic Material System
Suitable for CoreXY machines
Printing at the highest speed in sport and ludicrous mode
The filament with improved melting possibility that helps to print with higher speed
Very high strength filament
Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate
Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Specificaties:
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 25°C: 1.27 g/cm3
Melt Flow Index at g/10 min, 200°C/ 2.16kg: >14
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 50 mm/min: 47 MPa
Printing speed: 60-600 mm/s
Impact Strength: 8.7 KJ/m2
Ensile Break: 3-4 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 198 mm diameter x 67 mm height x 55 mm central hole
Systemeisen:
A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament
High speed filament for fast printers like Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron printers
Fits perfectly in Bambu Labs Automatic Material System
Suitable for CoreXY machines
Printing at the highest speed in sport and ludicrous mode
The filament with improved melting possibility that helps to print with higher speed
Very high strength filament
Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate
Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Specificaties:
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 25°C: 1.27 g/cm3
Melt Flow Index at g/10 min, 200°C/ 2.16kg: >14
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 50 mm/min: 47 MPa
Printing speed: 60-600 mm/s
Impact Strength: 8.7 KJ/m2
Ensile Break: 3-4 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 198 mm diameter x 67 mm height x 55 mm central hole
Systemeisen:
A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament