SEK 0,00
(fraktkostnad: 0,00)
Intel Solid-State Drive D3-S4610 Series - SSD - krypterat - 3.84 TB - inbyggd - 2.5" - SATA 6Gb/s - 256 bitars AES
Art.nr.: [4570611] | Tillverkare: Intel | Modell-nr.: SSDSC2KG038T801 | EAN: 0735858363068
Varan finns inte i lager
Varan finns inte i lager. Mer info
Fri frakt Instabox - Närmaste Paketbox
Se alla alternativ
| Instabox - Välj själv paketbox | Gratis |
| Bring - Närmaste utlämningställe | Gratis |
| Bring - Hemleverans - Levereras till din dörr på vardagar mellan 08:00 och 16:00. | 135,00 |
Slutsåld
Varan finns inte i lager.
SEK
13.385,00
ex. moms 10.708,00
Totalt inkl. frakt
13.385,00
Meddela mig när varan åter finns i lager
Funktionen kräver att man är inloggad. Skapa en användare och gör bruk av vårt smarta listsystem till att hålla koll på framtidiga köp, regelbundna köp eller önskelistor.
Skapa användare
Login
Skapa användare
Login
Send på mail
SATA drives, combining capacities up to 7.68TB with mid endurance to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs) for compute server mixed workloads.
Replace HDDs with the highly efficient Intel SSD D3-S4510 and D3-S4610 Series to reduce storage operating cost, and accelerate read-intensive workloads with power- efficient performance.
Move to more efficient storage while preserving your legacy infrastructure. Replacing HDDs with the Intel SSD D3-S4510 and D3-S4610 Series based on 64-layer Intel 3D NAND TLC, reduces the storage operating cost, accelerates read-intensive workloads at higher service levels and improves overall system dependability and flexibility.
These reliable SSDs meet demanding service level requirements while increasing server efficiency. Innovative SATA firmware and the latest generation of Intel 3D NAND make SSD D3-S4510 and D3-S4610 compatible with existing SATA setups for an easy storage upgrade.
Reduce Operating Cost While Preserving Infrastructure Investment
Built for compatibility with legacy infrastructures, the SSD D3-S4510 and D3-S4610 minimize the costs associated with modernizing your data center. Available in a variety of capacities, from 240GB up to 7.68TB, in a standard 2.5-inch, and M.2 form factor, the larger capacity drives consume up to 6x lower power and have up to 6x lower cooling1 requirements than 2.5-inch HDDs. The SSD D3-S4510 and D3-S4610 also enable 3.2x more data to be stored in the same amount of space.
Accelerate Read-Intensive Workloads with Power-Efficient Performance.
Simply by integrating SSDs into the environment, organizations can improve server agility with up to 300x more IOPS/TB than HDDs, supporting more users and better services to grow the business without expanding the server footprint. Additionally, the Flex Workload feature enables a common drive type to cover more workloads with flexible capacity, flexible endurance, and flexible power-efficient performance.
Improve System Reliability and Flexibility
The reliability of the SSD D3-S4510 and D3-S4610 reduces the need for drive replacement that is necessary with HDDs. With a 4.2x lower annualized failure rate (AFR) compared to HDDs, IT departments will spend less time and expense replacing or upgrading storage devices. Equally important, once the SSDs are installed, the innovative SATA firmware completes updates without reset, reducing downtime.
Replace HDDs with the highly efficient Intel SSD D3-S4510 and D3-S4610 Series to reduce storage operating cost, and accelerate read-intensive workloads with power- efficient performance.
Move to more efficient storage while preserving your legacy infrastructure. Replacing HDDs with the Intel SSD D3-S4510 and D3-S4610 Series based on 64-layer Intel 3D NAND TLC, reduces the storage operating cost, accelerates read-intensive workloads at higher service levels and improves overall system dependability and flexibility.
These reliable SSDs meet demanding service level requirements while increasing server efficiency. Innovative SATA firmware and the latest generation of Intel 3D NAND make SSD D3-S4510 and D3-S4610 compatible with existing SATA setups for an easy storage upgrade.
Reduce Operating Cost While Preserving Infrastructure Investment
Built for compatibility with legacy infrastructures, the SSD D3-S4510 and D3-S4610 minimize the costs associated with modernizing your data center. Available in a variety of capacities, from 240GB up to 7.68TB, in a standard 2.5-inch, and M.2 form factor, the larger capacity drives consume up to 6x lower power and have up to 6x lower cooling1 requirements than 2.5-inch HDDs. The SSD D3-S4510 and D3-S4610 also enable 3.2x more data to be stored in the same amount of space.
Accelerate Read-Intensive Workloads with Power-Efficient Performance.
Simply by integrating SSDs into the environment, organizations can improve server agility with up to 300x more IOPS/TB than HDDs, supporting more users and better services to grow the business without expanding the server footprint. Additionally, the Flex Workload feature enables a common drive type to cover more workloads with flexible capacity, flexible endurance, and flexible power-efficient performance.
Improve System Reliability and Flexibility
The reliability of the SSD D3-S4510 and D3-S4610 reduces the need for drive replacement that is necessary with HDDs. With a 4.2x lower annualized failure rate (AFR) compared to HDDs, IT departments will spend less time and expense replacing or upgrading storage devices. Equally important, once the SSDs are installed, the innovative SATA firmware completes updates without reset, reducing downtime.