SEK 0,00
(fraktkostnad: 0,00)
AXAGON HUE-S2BP - Hubb - 4 x SuperSpeed USB 3.0 - skrivbordsmodell
Art.nr.: [5500140] | Tillverkare: AXAGON | Modell-nr.: HUE-S2BP | EAN: 8595247903679
Fjärrlager (4-6 arbetsdagar)
Varan finns i vårt fjärrlager, leveranstiden är 4-6 arbetsdagar. Mer info
Frakt 49,00 - Instabox - Välj själv närmaste paketbox
Se alla alternativ
| Instabox - Välj själv paketbox | 49,00 |
| Bring – Hämta nära dig | 49,00 |
| Bring - Hemleverans - Levereras till din dörr på vardagar mellan 17:00 och 22:00. | 135,00 |
| Budbee - Hemleverans - Levereras på eftermiddagen eller kvällen. | 69,00 |
SEK
255,00
ex. moms 204,00
Totalt inkl. frakt
304,00
Funktionen kräver att man är inloggad. Skapa en användare och gör bruk av vårt smarta listsystem till att hålla koll på framtidiga köp, regelbundna köp eller önskelistor.
Skapa användare
Login
Skapa användare
Login
Send på mail
The four port AXAGON HUE-S2BP USB 3.0 hub with a 1.2 m long USB cable, power adapter and fast charging support on all ports.
A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time.
The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer.
Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly.
Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support.
It can even handle permanent connection of several external disks without external hub power. When power adapter is connected, you can even work with three external disks at one time.
The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.
It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.
Features:
• 4 downstream USB 3.0 ports with enough space around the connectors.
• an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable.
• Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).
• Supports USB Battery Charging v 1.2 specification.
• Included in the package is power supply with USB type-A 5V/2A output and 1.5 m micro USB charging & data cable.
• Each hub port can be used to charge up to 2A (with an external USB charger connected).
• The iPad charging support up to 2A (with an external USB charger) or up to 1A (without external power supply).
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• LED indication of hub connection to power supply.
• Current overload detection and protection.
• Hub dimensions 96 x 32 x 22 mm, USB charger dimensions 22 x 36 x 76 mm including the fork.
• Hub weight 76 g (incl. cable), USB charger weight 36 g ((without USB cable).
The hub power mode via USB cable (bus power):
• The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.
• In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously.
• Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer).
The hub power mode via the included USB charger (self power):
• In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.
Independent charging hub mode without being connected to the PC (charging hub):
• After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.
OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
• USB 3.0 hub with a permanently connected 120 cm long cable,
• universal power adapter / charger with USB 5V/2A output,
• universal charging and data cable USB type A male / micro USB male, 150 cm long,
• packed in a cardboard box with clearly indicated parameters and installation procedure.
A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time.
The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer.
Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly.
Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support.
It can even handle permanent connection of several external disks without external hub power. When power adapter is connected, you can even work with three external disks at one time.
The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.
It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.
Features:
• 4 downstream USB 3.0 ports with enough space around the connectors.
• an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable.
• Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).
• Supports USB Battery Charging v 1.2 specification.
• Included in the package is power supply with USB type-A 5V/2A output and 1.5 m micro USB charging & data cable.
• Each hub port can be used to charge up to 2A (with an external USB charger connected).
• The iPad charging support up to 2A (with an external USB charger) or up to 1A (without external power supply).
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• LED indication of hub connection to power supply.
• Current overload detection and protection.
• Hub dimensions 96 x 32 x 22 mm, USB charger dimensions 22 x 36 x 76 mm including the fork.
• Hub weight 76 g (incl. cable), USB charger weight 36 g ((without USB cable).
The hub power mode via USB cable (bus power):
• The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.
• In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously.
• Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer).
The hub power mode via the included USB charger (self power):
• In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.
Independent charging hub mode without being connected to the PC (charging hub):
• After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.
• Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.
OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
• USB 3.0 hub with a permanently connected 120 cm long cable,
• universal power adapter / charger with USB 5V/2A output,
• universal charging and data cable USB type A male / micro USB male, 150 cm long,
• packed in a cardboard box with clearly indicated parameters and installation procedure.